» 您尚未 登录   注册 | 银行 | 首页调用管理 | 博客 | 帮助 | 社区 | 无图版

华镭社区论坛 -> 安装引导 -> 请教Rays LX 1.0 下挂载USB活动硬盘的问题 ?

XML   RSS 2.0   WAP

--> 本页主题: 请教Rays LX 1.0 下挂载USB活动硬盘的问题 ?

加入收藏 | 收藏主题 | 上一主题 | 下一主题

smtp 级别: 新手上路 精华: 0 发帖: 8 威望: 1 点 镭: 0 L 贡献值: 0 点 在线时间:0(小时) 注册时间:2004-09-23 最后登录:1970-01-01

请教Rays LX 1.0 下挂载USB活动硬盘的问题 ? 我把USB活动硬盘插上USB接口以后，尝试着去mount其中的一个FAT32分区，结果 # mount -t vfat /dev/sda5 /mnt/usb mount: /dev/sda5 is not a valid block device # fdisk /dev/sda Unable to open /dev/sda 请教了，在Debian或者RHAS3上是好的 [楼 主] | Posted: 2004-09-23 16:29

redarmy 级别: 中级会员 精华: 0 发帖: 119 威望: 1 点 镭: 0 L 贡献值: 0 点 在线时间:0(小时) 注册时间:2004-03-05 最后登录:1970-01-01

执行dmesg，把执行结果贴出来，以便我们定位问题，可以么？ [1 楼] | Posted: 2004-09-24 11:53

smtp 级别: 新手上路 精华: 0 发帖: 8 威望: 1 点 镭: 0 L 贡献值: 0 点 在线时间:0(小时) 注册时间:2004-09-23 最后登录:1970-01-01

这是插上USB活动硬盘后的dmesg: done. VFS: Mounted root (cramfs filesystem) readonly. Freeing unused kernel memory: 152k freed NET: Registered protocol family 1 SCSI subsystem initialized libata version 1.02 loaded. Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx ICH4: IDE controller at PCI slot 0000:00:1f.1 ICH4: chipset revision 2 ICH4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xf000-0xf007, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xf008-0xf00f, BIOS settings: hdc:pio, hdd:DMA hda: ST380023A, ATA DISK drive Using anticipatory io scheduler ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdd: ASUS CD-S520/A, ATAPI CD/DVD-ROM drive ide1 at 0x170-0x177,0x376 on irq 15 hda: max request size: 128KiB hda: 156301488 sectors (80026 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) /dev/ide/host0/bus0/target0/lun0: p1 p2 p3 p4 < p5 p6 p7 p8 p9 > NTFS driver 2.1.14 [Flags: R/O MODULE]. kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Adding 522104k swap on /dev/hda2. Priority:-1 extents:1 EXT3 FS on hda7, internal journal Real Time Clock Driver v1.12 mice: PS/2 mouse device common for all mice input: PS2++ Logitech Wheel Mouse on isa0060/serio1 ts: Compaq touchscreen protocol output hdd: ATAPI 52X CD-ROM drive, 128kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.20 inserting floppy driver for 2.6.7-1-686 floppy0: no floppy controllers found Capability LSM initialized 8139too Fast Ethernet driver 0.9.27 eth0: RealTek RTL8139 at 0xb800, 00:0c:6e:78:16:e9, IRQ 17 eth0: Identified 8139 chip type \'RTL-8101\' Intel 810 + AC97 Audio, version 1.01, 10:49:36 Sep 3 2004 PCI: Setting latency timer of device 0000:00:1f.5 to 64 i810: Intel ICH4 found at IO 0xa400 and 0xa800, MEM 0xe6000000 and 0xe5800000, IRQ 17 i810: Intel ICH4 mmio at 0xd02a3000 and 0xd0342000 i810_audio: Primary codec has ID 0 i810_audio: Audio Controller supports 6 channels. i810_audio: Defaulting to base 2 channel mode. i810_audio: Resetting connection 0 i810_audio: Connection 0 with codec id 0 ac97_codec: AC97 Audio codec, id: ALG48 (Unknown) i810_audio: only 48Khz playback available. i810_audio: AC\'97 codec 0 supports AMAP, total channels = 2 usbcore: registered new driver usbfs usbcore: registered new driver hub ehci_hcd 0000:00:1d.7: Intel Corp. 82801DB (ICH4) USB2 EHCI Controller PCI: Setting latency timer of device 0000:00:1d.7 to 64 ehci_hcd 0000:00:1d.7: irq 23, pci mem d03a6000 ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1 PCI: cache line size of 128 is not supported by device 0000:00:1d.7 ehci_hcd 0000:00:1d.7: USB 2.0 enabled, EHCI 1.00, driver 2004-May-10 hub 1-0:1.0: USB hub found hub 1-0:1.0: 6 ports detected Linux agpgart interface v0.100 (c) Dave Jones agpgart: Detected an Intel 845G Chipset. agpgart: Maximum main memory to use for agp memory: 196M agpgart: Detected 8060K stolen memory. agpgart: AGP aperture is 128M @ 0xe8000000 USB Universal Host Controller Interface driver v2.2 uhci_hcd 0000:00:1d.0: Intel Corp. 82801DB (ICH4) USB UHCI #1 PCI: Setting latency timer of device 0000:00:1d.0 to 64 uhci_hcd 0000:00:1d.0: irq 16, io base 0000d800 uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2 hub 2-0:1.0: USB hub found hub 2-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.1: Intel Corp. 82801DB (ICH4) USB UHCI #2 PCI: Setting latency timer of device 0000:00:1d.1 to 64 uhci_hcd 0000:00:1d.1: irq 19, io base 0000d400 uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3 hub 3-0:1.0: USB hub found hub 3-0:1.0: 2 ports detected uhci_hcd 0000:00:1d.2: Intel Corp. 82801DB (ICH4) USB UHCI #3 PCI: Setting latency timer of device 0000:00:1d.2 to 64 uhci_hcd 0000:00:1d.2: irq 18, io base 0000d000 uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4 hub 4-0:1.0: USB hub found hub 4-0:1.0: 2 ports detected cpci_hotplug: CompactPCI Hot Plug Core version: 0.2 pci_hotplug: PCI Hot Plug PCI Core version: 0.5 pciehp: acpi_pciehprm:\\_SB_.PCI0 evaluate _BBN fail=0x5 pciehp: acpi_pciehprm:get_device PCI ROOT HID fail=0x5 shpchp: acpi_shpchprm:\\_SB_.PCI0 evaluate _BBN fail=0x5 shpchp: acpi_shpchprm:get_device PCI ROOT HID fail=0x5 hw_random: RNG not detected Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(1) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) Search for id:(ff ff) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero Search for id:(00 f8) interleave(1) type(1) Search for id:(bf 57) interleave(1) type(1) Search for id:(00 f8) interleave(1) type(1) Search for id:(00 00) interleave(1) type(2) Search for id:(00 00) interleave(1) type(2) Search for id:(00 00) interleave(1) type(2) JEDEC: Found no ICH2 rom device at location zero 8139cp: 10/100 PCI Ethernet driver v1.2 (Mar 22, 2004) eth0: link up, 100Mbps, full-duplex, lpa 0x45E1 NET: Registered protocol family 17 parport: PnPBIOS parport detected. parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP] lp0: using parport0 (interrupt-driven). NET: Registered protocol family 10 Disabled Privacy Extensions on device c0305780(lo) IPv6 over IPv4 tunneling driver [drm] Initialized i830 1.3.2 20021108 on minor 0: Intel Corp. 82845G/GL[Brookdale-G]/GE Chipset Integrated Graphics Device mtrr: base(0xe8020000) is not aligned on a size(0x180000) boundary eth0: no IPv6 routers present usb 1-5: new high speed USB device using address 2 usb 1-5: config 1 descriptor has 1 excess byte, ignoring Initializing USB Mass Storage driver... scsi0 : SCSI emulation for USB Mass Storage devices Vendor: Genesys Model: USB to IDE Disk Rev: 0002 Type: Direct-Access ANSI SCSI revision: 02 SCSI device sda: 78140160 512-byte hdwr sectors (40008 MB) sda: assuming Write Enabled sda: assuming drive cache: write through 从黑体的这段看上去是认到/dev/sda了 可是我却无法操作，fdisk看分区也不行 /dev/sda5根本不存在 再列出lsmod的信息: Module Size Used by usb_storage 68123 3 i830 78724 2 ipv6 255488 8 parport_pc 35008 1 lp 11204 0 parport 41832 2 parport_pc,lp af_packet 22376 2 8139cp 20672 0 snd_intel8x0 36460 0 snd_ac97_codec 70020 1 snd_intel8x0 snd_pcm 98756 1 snd_intel8x0 snd_timer 25668 1 snd_pcm snd_page_alloc 11752 2 snd_intel8x0,snd_pcm gameport 4704 1 snd_intel8x0 snd_mpu401_uart 7968 1 snd_intel8x0 snd_rawmidi 25184 1 snd_mpu401_uart snd_seq_device 8200 1 snd_rawmidi snd 56644 7 snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer,sn d_mpu401_uart,snd_rawmidi,snd_seq_device jedec_probe 14752 0 gen_probe 3776 1 jedec_probe mtdcore 7588 0 chipreg 3364 1 jedec_probe pci_hotplug 34640 0 uhci_hcd 32880 0 intel_agp 19836 1 agpgart 34152 3 intel_agp ehci_hcd 31908 0 usbcore 114784 5 usb_storage,uhci_hcd,ehci_hcd i810_audio 33972 2 ac97_codec 18956 1 i810_audio soundcore 10336 4 snd,i810_audio 8139too 26112 0 mii 5120 2 8139cp,8139too crc32 4320 2 8139cp,8139too capability 4520 0 commoncap 7200 1 capability tsdev 7328 0 ide_cd 43332 0 cdrom 40352 1 ide_cd evdev 9568 0 psmouse 20360 0 mousedev 10444 2 rtc 12760 0 ntfs 93292 0 msdos 9696 0 vfat 14656 1 fat 46688 2 msdos,vfat reiserfs 245424 0 isofs 35416 0 ext2 72392 0 ext3 127144 1 jbd 62264 1 ext3 mbcache 9348 2 ext2,ext3 ide_disk 19264 3 ide_generic 1408 0 piix 13440 1 ide_core 142808 5 usb_storage,ide_cd,ide_disk,ide_generic,piix sd_mod 22784 2 ata_piix 8004 0 libata 41700 1 ata_piix scsi_mod 125004 3 usb_storage,sd_mod,libata unix 28624 558 另外，我的活动硬盘为40G，其中有两个分区，一个是NTFS，一个是FAT32，sda5就是其中的FAT32分区，是不是由于我另外一个分区是NTFS的原因造成以上的情况? 请教了 谢谢 :D [2 楼] | Posted: 2004-09-24 13:17

smtp 级别: 新手上路 精华: 0 发帖: 8 威望: 1 点 镭: 0 L 贡献值: 0 点 在线时间:0(小时) 注册时间:2004-09-23 最后登录:1970-01-01

up一下 呵呵 [3 楼] | Posted: 2004-09-27 12:01

yorick 级别: 新手上路 精华: 0 发帖: 19 威望: 1 点 镭: 0 L 贡献值: 0 点 在线时间:1(小时) 注册时间:2003-02-18 最后登录:2008-04-13

mknod /dev/sda5 b 8 5 [4 楼] | Posted: 2004-09-27 15:29

smtp 级别: 新手上路 精华: 0 发帖: 8 威望: 1 点 镭: 0 L 贡献值: 0 点 在线时间:0(小时) 注册时间:2004-09-23 最后登录:1970-01-01

挂上硬盘后，过一会会出现/dev/sda5，但是mount的话就死掉 # ls -al /dev/sda5 brw-rw---- 1 root disk 8, 5 2004-09-29 11:01 /dev/sda5 # mount /dev/sda5 /mnt/usb/ /dev/sda5: 输入/输出错误 [5 楼] | Posted: 2004-09-29 11:14

redarmy 级别: 中级会员 精华: 0 发帖: 119 威望: 1 点 镭: 0 L 贡献值: 0 点 在线时间:0(小时) 注册时间:2004-03-05 最后登录:1970-01-01

我们这边测试移动硬盘是通过的。我们的移动硬盘是Unisbox (USB 2.0). 请问： 1.移动硬盘什么型号的？ 2.你使用的是什么版本的Rays？是否在线升级过？ [6 楼] | Posted: 2004-10-10 09:12

smtp 级别: 新手上路 精华: 0 发帖: 8 威望: 1 点 镭: 0 L 贡献值: 0 点 在线时间:0(小时) 注册时间:2004-09-23 最后登录:1970-01-01

我测试的两块硬盘都挂不上去一块是ICS的一块是Toshiba的，呵呵 安装的版本不确定但是在线升级过，都是最新的了 [7 楼] | Posted: 2004-10-12 10:20

	快速跳至 >> 华镭系统论坛  |- 安装引导  |- 桌面操作  |- 应用程序  |- 硬件支持    |- 华镭龙芯版  |- 服务器应用  |- 开发交流  |- 推广应用  |- 休闲区 >> 华镭社区项目  |- 汉统Unihan >> 华镭社区中心  |- 论坛系统  |- 维基系统  |- 博客系统  |- 新闻与公告
华镭社区论坛 -> 安装引导